Fontana Montpellier™ Touchless Set
Fontana FS474-D Montpellier Series: Commercial Touchless Faucet & Automatic Soap Dispenser Sets
The Fontana FS474-D Montpellier Series is specified as a coordinated commercial touchless faucet and automatic soap dispenser set for high-traffic restroom environments. The system is designed for public restrooms, restaurants, office buildings, public facilities, hospitals, hospitality venues, and large commercial interiors where touch-free water delivery, controlled soap dispensing, finish coordination, and long-term maintenance access must be planned together.
Fontana Montpellier™ – Brushed Gold Touchless Faucet & Automatic Soap Dispenser Set
The Brushed Gold FS474BG-D set positions the handwashing station as a coordinated design and specification element. The warm brushed finish is suitable for hospitality restrooms, airport lounges, executive commercial washrooms, and public-facing amenity areas where the soap dispenser and faucet should read as one integrated system rather than separate accessories.
CSI 3-Part Specification
| Part 1 — General | |
|---|---|
| CSI Sections | 22 40 00 Plumbing Fixtures / 10 28 13 Toilet Accessories |
| System Type | Commercial touchless faucet and automatic soap dispenser set |
| Submittals | Product data, BIM file, specification sheet, installation instructions, repair and maintenance guide, product detail brochure, 3D rendering, warranty sheet |
| Part 2 — Products | |
| Model | FS474BG-D |
| Finish | Brushed gold |
| Faucet Installation | Lavatory / deck mounted |
| Faucet Supply | Cold or premixed water, 1 inlet |
| Water Temperature | Max 70°C |
| Operating Pressure | 0.5–8.0 bar |
| Water Flow | 6 LPM / 1.58 GPM |
| Sensor | Motion detection touchless sensor with infrared AI smart-chip |
| Faucet Power | 9V alkaline battery; AC110V and DC6V option noted in specification reference |
| Dispenser Power | 12V transformer |
| Soap Dose | Default 1.4 cc |
| Soap Viscosity | 100–3800 CPS |
| Connections | G-1/2 inlet/outlet diameter |
| Dispenser Activation | Infrared sensor, self-adjusting range, activation time under 1 second |
| Part 3 — Execution | |
| Installation Coordination | Coordinate deck openings, basin geometry, splash zone, soap bottle access, electrical/power routing, and maintenance clearance |
| Commissioning | Verify faucet activation, soap dose, water flow, sensor response, refill access, and finish protection before turnover |
BIM / Revit-Ready Terminology
Family Name: PlumbingFixture_IntegratedTouchless_FaucetSoap_Fontana_FS474BGD. Parameters: Finish = Brushed Gold; System = Touchless Faucet + Automatic Soap Dispenser; Faucet Flow = 1.58 GPM; Soap Dose = 1.4 cc; Soap Viscosity = 100–3800 CPS; Spec Sections = 22 40 00 / 10 28 13.
Industry Segmentation
- Airports: Premium lounge restrooms and upgraded terminal washrooms where finish coordination and high-use durability matter.
- Healthcare: Public and staff restrooms where reduced touchpoints and controlled soap delivery support hygiene planning.
- Hospitality: Hotel lobbies, restaurants, resorts, and event venues where the faucet and soap dispenser must align with the design palette.
The brushed gold FS474BG-D set is useful where the handwashing station must balance commercial performance with an elevated finish package. In hospitality and premium public restroom settings, mismatched soap dispensers can weaken the design intent; this coordinated set avoids that issue by treating soap and water delivery as one system. The sensor faucet supports reduced contact, while the automatic dispenser helps control soap usage and waste. From a facility perspective, the key value is consistent activation, standard maintenance access, and a finish that can support upscale interiors without creating separate specification challenges for the dispenser.